19 found, showing page 1 of 2
SQ D HOM FILLER PLATE
Schneider Electric / Square D Homeline Filler plate measuring 2.500 Inch x 1 Inch x 0.400 Inch is ergonomically designed for use on Homeline load center cover branch circuit breaker openings.
- Size: 2.500 Inch Length x 1 Inch Width x 0.400 Inch Height
View Details
Call for Price
SQ D 200 AMP MAIN LOAD CENTER
Single phase, 3-wire, insulated/bonded split neutral. 200 A, 8 spaces/16 circuits maximum. 120/240 VAC. 10,000 AIR. For mobile homes and farm applications. Overhead or underground feeds and offers feed-thru lugs. Plated aluminum bus bar. Has a 22,000 maximum short circuit current rating. Provided equipment: circuit breaker 2P 200 A 120/240 VAC main supply ready assembled and grounding bar ready assembled. UL listed.
- Straight-in mains design helps reduce the need to bend service cable, cutting waste and saving installation time.
- Convertible mains let you meet changing job site requirements by field converting main breaker load centers to main lugs or vice versa.
- Optional high interrupting field installed main breakers increase short circuit current rating to 22,000/10,000 ampere.
- Interior is easily removed for paint or theft protection during rough-in. - Single, captive screw can't be lost; interior mounts quickly and easily. - Split branch neutral with up to 50% more terminations than required.
- Reduces clutter and simplifies wiring.
- Combination slot/square-drive neutral ground and cover screws let you use either standard flat blade screwdriver or square-head driver for reduced slippage and improved torque.
- Improved bus and interior assembly is among the most rugged in the industry.
- Three ground bar mounting locations (left, right, bottom) let you pick the easiest spot to wire.
- Tangential main service knockouts eliminate the need for costly service conduit offset, simplifying and speeding installation.
- Complete load center rotates for top or bottom feed to meet job site requirements and reduces service cable waste.
View Details
Call for Price
40/40 LOAD CENTER 240V 200A
Schneider Electric/Square D Homeline Convertible main breaker load center features tin-plated aluminum bus material and QOM2 size frame. It has a voltage rating of 120/240 VAC, current rating of 200 Amps and interrupting rating of 22 kilo-Amps. The 1-Phase, 3-Wire load center comes with 40 spaces and has a steel NEMA 1 indoor enclosure. It accommodates aluminum/copper wire of size 4 AWG - 250 kcmil and 40 circuits. It finds use in residential, commercial and industrial requirements to protect electrical systems, equipment and people. It measures 14.250 Inch x 3.750 Inch x 39.370 Inch. Load center is UL listed.
- Size: 14.250 Inch Width x 3.750 Inch Depth x 39.370 Inch Height
- Offers time-savings for plug-on neutral Combination Arc Fault (CAFI) and dual function circuit breaker installation - Designed to save you time and wire, allowing plug-on neutral circuit breakers to connect directly to the neutral bar without the pigtail
- Faster and easier wiring-All spaces accept tandems
View Details
Call for Price
QO200TRCP CASE MOLDED SWITCH
60a non fused disconnect, rainproof, double pole with ground bar, 240v, ul listed.
View Details
Call for Price
QO816L100RBCP 100A LOAD CENTER
Main lug outdoor load center, 100 amp, 8 space/16 circuit, has a 2-1/2" maximum type B hub in the top end wall, a 1-1/2" maximum knockout in the bottom end wall and a B-cap covering on the 2" bushed opening. NEMA type 3R enclosure with a rainproof cover for outdoor use. ANSI Certified and UL Listed.
- Outdoor
- Top/Bottom Feed
- Amp Rating : 100
- Indoor and outdoor versions
- Separate flush or surface mount covers
- Exclusive shielded copper bus features electro tin plated copper bus bars sandwiched between two rugged polymer shields to insulate and secure the interior
- Straight-in mains wiring and uniform termination lugs help minimize service cable bends, cutting waste and saving installation time
- Convertible mains allow fast field conversion between main breaker and main lugs to meet changing job requirements
- QO three-phase main circuit breaker panels can be field upgraded to provide 100 kA short circuit current ratings
- Single, captive interior mounting screw can't be lost. Interior mounts quickly and can easily be removed during rough-in for paint or theft protection
- Split branch neutral with up to 50% more terminations than UL requirement - simplifies wiring and reduces clutter
- Indoor enclosures designed to rotate 180 deg to accommodate top or bottom service entrance feed, saving expensive service cable
- Combination slot/square-drive neutral, ground and cover screw accommodate both standard flat blade screwdrivers and square-head drivers
View Details
Call for Price
SURFACE LOAD CENTER COVER
- Load Center QO Cover Surface
- Indoor Cover With Door
- Surface Mounting
View Details
Call for Price
QO24L70SCP 70A MAINLUG PANEL
Schneider Electric/Square D 1-Phase 3-Wire Fixed main lug load center has tin-plated copper busbar construction for durability. It has a voltage rating of 120/240 VAC and current rating of 70 Amps. It has 4 circuits, 2 tandem circuit breakers and two spaces for convenient operations. It has short-circuited current rating of 10 kilo-Amps. It has NEMA 1 indoor enclosure to provide protection against dust, light and indirect splashing. It includes surface cover to improve aesthetic look.
Load center has grounding bar for easy installation. It can be used in residential, commercial and industrial applications to protect electrical systems and equipments. Load center can accommodate copper wires of size 14 - 4 AWG, aluminum wires of size 12 - 3 AWG. It measures 4.810 Inch x 3.190 Inch x 9.300 Inch. Load center is UL listed.
- Size: 4.810 Inch Width x 3.190 Inch Depth x 9.300 Inch Height
- Exclusive shielded copper bus features electro tin plated copper bus bars sandwiched between two rugged polymer shields to insulate and secure the interior
- Straight-in mains wiring and uniform termination lugs help minimize service cable bends, cutting waste and saving installation time
- Single, captive interior mounting screw can't be lost, interior mounts quickly and can easily be removed during rough-in for paint or theft protection
- Three ground bar mounting locations make it easier to wire
View Details
Call for Price
DISCONNECT SWITCH 60A 2-POLE
Single phase, 2 pole, 2 wire, 240 volt AC, galvanized steel enclosure with molded case switch. Rated 3 HP at 120 volt, 10 HP at 240 volt. For bottom entry and exit only. Heavy duty, high strength enclosure with welded and riveted construction. Swing-up cover remains in place when in open position, and includes provision for padlocking. 10,000 AIR. When pullout is in off position, protective shield can be removed for access to fuses. No.GB4 ground bar and No.96-3258-4 pullout head replacement sold separately. #14-3 AWG wire range. 5-3/8" x 8-3/4" x 3-1/8". UL Listed file No.E5239.
- Outdoor - NEMA 3R
- Rainproof - Non-Fusible - Pullout
- Amp Rating : 60
- Easy to install
- Use to disconnect power from an air-conditioning unit
- Metallic case is approved for outdoor use
- Knockouts on back, bottom and sides offer a variety of configurations
View Details
Call for Price
240V 70AMP LOAD CENTER
Schneider Electric/Square D Homeline(TM) 1-Phase 3-Wire Fixed main load center in gray color has tin-plated aluminum busbar construction with a welded sheet steel enclosure for durability. It has a voltage rating of 120/240 VAC and current rating of 70 Amps. It has four circuits, two tandem circuit breakers and two spaces for convenient operations. It has short-circuited current rating of 10 kilo-Amps and interrupting rating of 10 kilo-Amps. Load center has NEMA 1 indoor enclosure to provide protection against dust, light and indirect splashing.
Load center has lugs for easy connectivity. Load center has surface cover to improve aesthetic look. It can be used in residential, commercial and industrial applications to provide protection from any electrical hazardous. Load center can accommodate copper wires of size 14 - 4 AWG and aluminum wires of size 12 - 3 AWG. It measures 11.190 Inch x 3.090 Inch x 9.300 Inch. Load center is UL listed.
- Size: 11.190 Inch Width x 3.090 Inch Depth x 9.300 Inch Height
- Offers time-savings for plug-on neutral Combination Arc Fault (CAFI) and dual function circuit breaker installation
- Designed to save you time and wire, allowing plug-on neutral circuit breakers to connect directly to the neutral bar without the pigtail
- Faster and easier wiring - All spaces accept tandems
- Device composition is grounding bar
- Convertible to 22 Kilo-Amp IR main circuit breaker
View Details
Call for Price
B125CP SQ D 1-1/4IN HUB
Aluminum, for use on NEMA 3R (outdoor) enclosures. Off-center conduit threaded opening and elongated mounting holes reduce the need for conduit offsets and bends while allowing for adjustments. Type B size and is UL and CSA safety listed.
- Outdoor - NEMA 3R
- Bolt-On - B Style
- Rainproof
- Size In : 1-1/4
- For use in Square D load centers, CSED devices and safety switches
- Can be used for outdoor load centers and safety switches
View Details
Call for Price
SQD METER MAIN RINGLESS KIT
Schneider Electric / Square D Homeline(R) Meter main measures 5.8 Inch x 14.9 Inch x 36.5 Inch. It has a voltage rating of 120/240 VAC and current rating of 200 Amps. It allows increased durability/reliability with maximum circuit layout for flexibility and installation is made with ease. It has an interrupt current rating of 22000 Amps. Load center has eight space, 16-circuit, four jaw ringless type and is suitable for OH/UG surface mounting with NEMA 1/3R surface enclosure. It is used as a combination of meter socket/main breaker load center and copper buss is used for superior conductivity.
Load center has removable side opening door and wide box with large wire bend space for inside top/bottom feed. It fits plug-on secondary surge arrestor and has a plug-in design for an easy installation. It includes bonded neutral, removable closing cap and enclosure size of R16. It is suitable for overhead/underground feed aluminum bus bar of type-A hub. It has a top end-wall with maximum 2-1/2 Inch knockout in bottom surface mount and horn bypass with feed through lug. Center meets UL/EUSERC standards and ANSI certified.
- Feed-through lugs service ground lugs line side electrical connection
- (3) (1/2 Inch, 34 Inch) Concentric knockout, (1) (1/2 Inch, 34 Inch, 1 Inch) Concentric knockout, (1) (1 Inch, 1-1/4 Inch, 1-1/2 Inch, 2 Inch) Concentric knockout, (3) (1-1/4 Inch, 1-1/2 Inch, 2 Inch, 2-1/2 Inch) Concentric knockout, (2) 2 1/2 Inch Hub type
View Details
Call for Price
HOM612L100SCP 100A LOAD CENTER
This load center from Square D is sure to keep your electrical system running strong. This main lug load center comes with 6 spaces. It is rated to 100 amps with a 1 NEMA rating. The recommended surface cover is Included and the recommended ground bar kit cover is 1D374. This load center has a top or bottom feed. It is a HOM type circuit breaker. This product is a part of the HOM61 series. It has 1 phase. It has a voltage of 120/240VAC and 100 amps. Standards include: UL Listed (E-6294), Federal Specification W-P-115c As Type 1 Class 2.
View Details
Call for Price
QOFPCP LOAD CENTER FILLER PLAT
Fills opening in covers if twistout is removed in error. QOFPCP are used only in QO load centers, filling the spaces where no circuit is attached. CHOMFPCP are for use only in Homeline load centers. UL Listed and ANSI Certified.
- QO Load Centers Only
- For use only in home line load centers
View Details
Call for Price
SQDQOC12US SURFACE MOUNT DOOR
Cover, Length 14.92 In., Width 14.24 In., Mounting Style Surface, For Use With QO Series Load Center, Includes Door
View Details
Call for Price
HOM100ANCP 100A NEUTRAL LUG KT
Breaker box neutral lug is designed for Homeline load centers. It works with number 1 - 1/0 copper and aluminum wire. UL Listed, ANSI Certified.
- Auxiliary
- For Home line load centers
- Branch, large-style design
- Accepts 1 - 1/0 AWG aluminum or copper wire
View Details
Call for Price
